Enerdrive B-TEC 100amp 36v LiFePO4 Battery BT EPL-100BT-36V

Struggling to find a reliable deep cycle battery that can handle your 36V power requirements? The Enerdrive EPL-100BT-36V is the high-performance lithium solution you’ve been searching for. With advanced Bluetooth monitoring, built-in protection, and trusted Australian engineering, this battery delivers dependable power without the bulk or maintenance of traditional systems. Whether you’re running a large-scale 36V setup in a caravan, boat, or off-grid location, this compact powerhouse gives you control, longevity, and peace of mind.

Enerdrive 36V 100Ah EPL-100BT-36V: Smart, Efficient, and Built to Perform

The Enerdrive B-TEC 36V 100Ah Lithium Battery is purpose-built for deep cycle applications that demand 36V output. Designed for internal installation, it’s ideal for marine, caravan, and remote energy systems where compact size, long service life, and advanced safety features are non-negotiable. Backed by a 5-year warranty and over a decade of Enerdrive innovation, this battery sets the standard in high-voltage lithium power solutions.

Enerdrive 36V 100Ah Lithium Battery: Total Control at Your Fingertips

Monitor every critical performance metric with the integrated Bluetooth Smart Monitoring System. Simply download the Enerdrive app to your Apple® or Android™ device and access real-time data including:

• Battery Capacity, Voltage & Current (Amps)
• State of Charge (SOC) & State of Health (SOH)
• Individual Cell Voltages
• Battery Temperature & Cycles
• Alarm Notifications & Historical Events

The internal Battery Management System (BMS) ensures safe, consistent operation by protecting the battery from overcharge, over-discharge, short circuit, and overheating. If the battery is fully discharged and the BMS shuts down, it must be recharged within 14 days to prevent permanent cell damage.

Enerdrive 100Ah Lithium Battery vs AGM: More Power, Less Weight

Say goodbye to bulky AGM batteries. The Enerdrive EPL-100BT-36V delivers unmatched efficiency and convenience:

• 100Ah Lithium = 160Ah AGM Equivalent
• Up to 2500 charge cycles at 80% Depth of Discharge
• 60% more usable power output
• Nearly 50% lighter and 30% more compact than AGM

This battery is ideal for anyone looking to maximise performance in a limited space without compromising on reliability or capacity.

Installation Guidelines & Compatibility

This battery is designed exclusively for internal use and should not be installed in engine bays, wet areas (such as ute trays or caravan chassis), or compartments used for gas storage. It supports parallel connection with a second 36V B-TEC battery of the same size—no more than two batteries in parallel. Combined loads must not exceed the BMS current limits of a single unit. The 36V 100Ah model supports a maximum inverter capacity of 1000W.

For large-scale or multi-battery systems, Enerdrive’s Pro Series Power Pack Systems are the recommended upgrade, offering full active cell balancing and advanced configuration options.

What’s Included & Trusted by Australians

Each purchase includes:

• 1 x Enerdrive EPL-100BT-36V 100Ah Lithium Battery

Enerdrive is a market leader in Australian off-grid and mobile energy systems, with thousands of units deployed across caravans, boats, 4WDs, and industrial sites. Their B-TEC range is engineered for safety, reliability, and full compliance with Australia’s evolving power standards. A dedicated fitment guide for B-TEC and e-LITE batteries is available to help installers meet the latest 2023 regulations with confidence.

SKU: EPL-100BT-36V

Nominal Voltage: 38.4V

Nominal Capacity: 100Ah

Cycle Life (DOD – 80%): >2500 Cycles

Battery Charge Temperature: 0 ~ 45°C

Normal Charge Voltage (CV/CC): 43.20 ~ 43.80V

Standby (Float) Voltage: 40.5 ~ 41.40V

Maximum Charge Current: 50A @ 25°C for 30 minutes

Recommended Charge Current: ≤33A

Battery Discharge Temperature: -20 ~ 60°C

Battery Output Voltage Range: 33.00 ~ 43.80V

Maximum Discharge Current: 100A @ 25°C ± 5°C for 30 minutes

Pulse Discharge Current: 450A for 1.0s

Discharge Cut-off Voltage: ≤33.60V

Circuit Protection: Supplied with a LiFePO4 Battery Management System (BMS) that monitors and optimizes each prismatic cell during charge and discharge. Protects against overcharge, over discharge, and short circuit for safe and accurate battery operation.

Over-Charge Protection Per Cell: 3.90V ± 0.03V

Over-Charge Release Per Cell: 3.60V ± 0.05V

Over-Charge Release Method: Discharge below release voltage

Over-Discharge Protection Per Cell: 2.80V ± 0.05V

Over-Discharge Release Per Cell: 3.20V ± 0.05V

Over-Discharge Release Method: Apply Charge / Voltage ≥38.4V

Discharge Over Current: 110A for 30s / 450A for 1s

Protection Reset Time: 5s Auto Release

Over Current Release Method: Disconnect Load

Battery Discharge Over Temperature: Protection to 65°C ± 5°C, Release at 50°C ± 5°C

Battery Charge Over Temperature: Protection to 55°C ± 5°C, Release at 45°C ± 5°C

Short Circuit Protection: Auto release after 5s

Length: 519mm

Width: 273mm

Height: 222mm

Weight: Approx 37.7 kg

Case Construction: Hi Impact ABS Plastic

Storage (≤30 days): -20°C ~ 60°C, 5 ~ 75% RH

Storage (≥90 days): -10°C ~ 45°C, 5 ~ 75% RH

Warranty: 5 Years