24V 100A Skylla-i SLA-LiFePO4 Dual Output (Second output 4A)

Victron EnergySKU: VECSI-24/100(1+1)

Price:
$2,705.95
Stock:
Low stock

Stock availability

Ships Today! 0
Ships within 2-3 Days! 0

Description

24V 100A Skylla-i SLA/LiFePO4 Dual Output Charger with M8 Connection SKI024100000

The lifepo4 -two-output-30a-4a-charger"> Skylla-i(1+1) features 2 isolated outputs. The second output, limited to approximately 4 A and with a slightly lower output voltage, is intended to top up a starter battery. Aluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions. Several chargers can be synchronised with the CAN bus interface. This is achieved by simply interconnecting the chargers with RJ45 UTP-cables. Please see the manual for details. The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (26,4 V for 24 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‚ refresh‚ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. In order to compensate for voltage loss due to cable resistance, the Skylla-i is provided with a voltage sense facility so that the battery always receives the correct charge voltage. The chargers also accept a DC supply. As a result of the perfectly stabilized output voltage, the Skylla-i can be used as a power supply if batteries or large buffer capacitors are not available. Simple charger on-off control can be implemented by connecting a relay or open collector optocoupler output from a Li-Ion BMS to the remote control port of the charger. Alternatively complete control of voltage and current can be achieved by connecting to the galvanically isolated CAN bus port.

Features:

  • 24V 100A Skylla-i SLA/LiFePO4 Dual Output Charger with M8 Connection
  • 2 isolated outputs
  • Circuit boards are protected with an acrylic coating for maximum corrosion resistance.
  • Battery temperature sensor
  • The chargers also accept a DC supply.

This package comes supplied with:

  • 24V 100A Charger

Every Skylla-i comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed lead-acid batteries and/or when important fluctuations of battery temperature are expected.

Payment & Security

Payment methods

American Express Apple Pay Google Pay Mastercard PayPal Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


Security

Estimate shipping

You may also like

Recently viewed