24V 80A Skylla-i SLA-LiFePO4 Dual Output (Second output 4A)
Rated 3.5/5 based on 11 customer reviews

24V 80A Skylla-i SLA-LiFePO4 Dual Output (Second output 4A)

  • Product SKU: VECSI-24/80(1+1)
Inventory :
$2,239.45
Hurry! only 0 left in stock!
Image
Ask about this product
Your message has been successfully sent to the store owner!
Add to Wishlist
Payment

24V 80A Skylla-i SLA/LiFePO4 Dual Output Charger with M8 Connection SKI024080000

The Skylla-i (1+1) features 2 isolated outputs. The second output, limited to approximately 4 A and with a slightly lower output voltage, is intended to top up a starter battery. Aluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Several chargers can be synchronised with the CAN bus interface. This is achieved by simply interconnecting the chargers with RJ45 UTP-cables. Please see the manual for details. The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (26,4 V for 24 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‚ refresh‚ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. In order to compensate for voltage loss due to cable resistance, the Skylla-i is provided with a voltage sense facility so that the battery always receives the correct charge voltage. The chargers also accept a DC supply. As a result of the perfectly stabilized output voltage, the Skylla-i can be used as a power supply if batteries or large buffer capacitors are not available. Simple charger on-off control can be implemented by connecting a relay or open collector optocoupler output from a Li-Ion BMS to the remote control port of the charger. Alternatively complete control of voltage and current can be achieved by connecting to the galvanically isolated CAN bus port.

Features:

  • 24V 80A Skylla-i SLA/LiFePO4 Dual Output Charger with M8 Connection
  • 2 isolated outputs
  • Circuit boards are protected with an acrylic coating
  • RJ45 UTP-cables
  • Battery temperature senso
  • The chargers accept a DC supply.

This package comes supplied with:

  • 24V 80A Charger

Every Skylla-i comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed lead-acid batteries and/or when important fluctuations of battery temperature are expected.

24V 80A Skylla-i SLA/LiFePO4 Dual Output Charger with M8 Connection SKI024080000

The Skylla-i (1+1) features 2 isolated outputs. The second output, limited to approximately 4 A and with a slightly lower output voltage, is intended to top up a starter battery. Aluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Several chargers can be synchronised with the CAN bus interface. This is achieved by simply interconnecting the chargers with RJ45 UTP-cables. Please see the manual for details. The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (26,4 V for 24 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‚ refresh‚ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. In order to compensate for voltage loss due to cable resistance, the Skylla-i is provided with a voltage sense facility so that the battery always receives the correct charge voltage. The chargers also accept a DC supply. As a result of the perfectly stabilized output voltage, the Skylla-i can be used as a power supply if batteries or large buffer capacitors are not available. Simple charger on-off control can be implemented by connecting a relay or open collector optocoupler output from a Li-Ion BMS to the remote control port of the charger. Alternatively complete control of voltage and current can be achieved by connecting to the galvanically isolated CAN bus port.

Features:

  • 24V 80A Skylla-i SLA/LiFePO4 Dual Output Charger with M8 Connection
  • 2 isolated outputs
  • Circuit boards are protected with an acrylic coating
  • RJ45 UTP-cables
  • Battery temperature senso
  • The chargers accept a DC supply.

This package comes supplied with:

  • 24V 80A Charger

Every Skylla-i comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed lead-acid batteries and/or when important fluctuations of battery temperature are expected.

So you’ve done your shopping; just how long will it be till you can rock that new bit of tech?

Here are a few things to consider while you wait for your order:

  • We ship in business days. Monday - Friday, excluding national holidays.
  • Shipping starts from the date you received the “Your Order Has Shipped!” email.
  • The estimate above does not include processing time - we need 1-3 business days to process your order. This can vary depending on the time of the month and the warehouse's workload - If you need something processed faster than this please CALL US before placing your order!

HBPlus is an Australian company - we work with production and shipping partners all over the world to get your things to your doorstep, wherever that may be. Although the vast majority of our customers will get their orders by the day listed above, actual timeframes may vary from region to region.

So when do you contact HBPlus?

Take your date of order placement, add 2 business days plus the estimated shipping days and when that day rolls around and you still don't have it please get in contact with us. Even if your order hasn’t arrived by the listed date, it’s probably still on its way (and worth the wait).

How much is shipping?

You can view an estimate on the product page for how much an individual item costs to ship to your postcode. Once you’ve clicked through to Secure Checkout, you can enter your delivery address and choose a shipping method. Shipping costs are then calculated and you can select your preferred method. Shipping is then tacked on to your subtotal at the bottom of the page.

Can I track my order? 

We rely on a network of shipping partners and couriers as well as local postal services to get your order to your doorstep as soon as possible. Tracking is available once the order ships and the carrier collects the order. These details will be included on your orders page as well as on the shipping email we send you.

Where does my order ship from?

As one of Australias largest wholesalers, we have an Australian network of Warehouse's, 3PL DC's. In most cases your order will ship from our Main Victorian warehouse however depending on stock availability and/or location we may ship from a different location. At all times this will be to improve our service and delivery time frame to you.