BlueSolar MPPT75/10A 12V/24V 10A Solar Charge Controller SCC010010050R
Rated 3.5/5 based on 11 customer reviews

BlueSolar MPPT75/10A 12V/24V 10A Solar Charge Controller SCC010010050R

  • Product SKU: BlueSolar MPPT75/10
Inventory :
$134.50
Hurry! only 0 left in stock!
Image
Ask about this product
Your message has been successfully sent to the store owner!
Add to Wishlist
Payment

BlueSolar MPPT75/10A 12V/24V 10A Solar Charge Controller SCC010010050R

BlueSolar MPPT75/10A solar charge controller from Victron Energy with:

  • 12V/24V auto select battery voltage
  • 10A rated charge current
  • 145W @12V or 290W @24V maximum PV power
  • Automatic load disconnect
  • 98% peak efficiency
  • Reverse polarity (fuse) protection, output short circuit protection, over temperature protection

Ultra fast Maximum Power Point Tracking (MPPT)

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Load output

Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a preset voltage.

Alternatively, an intelligent battery management algorithm can be chosen: see BatteryLife. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.

BatteryLife: intelligent battery management

When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will be continually be cycled between a “partially charged” state and the “end of discharge” state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months.

The BatteryLife algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i. e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.

Real-time data display options

  • Apple and Android smartphones, tablets and other devices: see the VE.Direct to Bluetooth low energy dongle
  • ColorControl panel

BlueSolar MPPT75/10A 12V/24V 10A Solar Charge Controller SCC010010050R

BlueSolar MPPT75/10A solar charge controller from Victron Energy with:

  • 12V/24V auto select battery voltage
  • 10A rated charge current
  • 145W @12V or 290W @24V maximum PV power
  • Automatic load disconnect
  • 98% peak efficiency
  • Reverse polarity (fuse) protection, output short circuit protection, over temperature protection

Ultra fast Maximum Power Point Tracking (MPPT)

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Load output

Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a preset voltage.

Alternatively, an intelligent battery management algorithm can be chosen: see BatteryLife. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.

BatteryLife: intelligent battery management

When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will be continually be cycled between a “partially charged” state and the “end of discharge” state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months.

The BatteryLife algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i. e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.

Real-time data display options

  • Apple and Android smartphones, tablets and other devices: see the VE.Direct to Bluetooth low energy dongle
  • ColorControl panel

So you’ve done your shopping; just how long will it be till you can rock that new bit of tech?

Here are a few things to consider while you wait for your order:

  • We ship in business days. Monday - Friday, excluding national holidays.
  • Shipping starts from the date you received the “Your Order Has Shipped!” email.
  • The estimate above does not include processing time - we need 1-3 business days to process your order. This can vary depending on the time of the month and the warehouse's workload - If you need something processed faster than this please CALL US before placing your order!

HBPlus is an Australian company - we work with production and shipping partners all over the world to get your things to your doorstep, wherever that may be. Although the vast majority of our customers will get their orders by the day listed above, actual timeframes may vary from region to region.

So when do you contact HBPlus?

Take your date of order placement, add 2 business days plus the estimated shipping days and when that day rolls around and you still don't have it please get in contact with us. Even if your order hasn’t arrived by the listed date, it’s probably still on its way (and worth the wait).

How much is shipping?

You can view an estimate on the product page for how much an individual item costs to ship to your postcode. Once you’ve clicked through to Secure Checkout, you can enter your delivery address and choose a shipping method. Shipping costs are then calculated and you can select your preferred method. Shipping is then tacked on to your subtotal at the bottom of the page.

Can I track my order? 

We rely on a network of shipping partners and couriers as well as local postal services to get your order to your doorstep as soon as possible. Tracking is available once the order ships and the carrier collects the order. These details will be included on your orders page as well as on the shipping email we send you.

Where does my order ship from?

As one of Australias largest wholesalers, we have an Australian network of Warehouse's, 3PL DC's. In most cases your order will ship from our Main Victorian warehouse however depending on stock availability and/or location we may ship from a different location. At all times this will be to improve our service and delivery time frame to you.