Phoenix Smart Inverter 18.6-34VDC input 24V VPSINV-24/3000
Rated 3.5/5 based on 11 customer reviews

Phoenix Smart Inverter 18.6-34VDC input 24V VPSINV-24/3000

  • Product SKU: VPSINV-24/3000
Inventory :
$2,168.45
Hurry! only 0 left in stock!
Image
Ask about this product
Your message has been successfully sent to the store owner!
Add to Wishlist
Payment

Phoenix Smart Inverter 18.6-34VDC input 24V VPSINV-24/3000

Related Products:

  • VE.Direct to USB Interface
  • Phoenix Inverter Control VE.Direct
  • Colour Control GX
  • BMV-712 Smart

24V 3000VA

Bluetooth built-in: fully configurable with a tablet or smartphone

  • Low battery voltage alarm
  • Low battery voltage cut-off and restart levels
  • Dynamic cut-off: load dependent cut-off level
  • Output voltage: 210 - 245V
  • Frequency: 50 Hz or 60 Hz
  • ECO mode on/off and ECO mode sense level
  • Alarm relay

Monitoring:

  • In- and output voltage, load and alarms

VE.Direct communication port - The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters.

Proven reliability - The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

High start-up power - Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

ECO mode - When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.

Remote on/off - A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).

LED diagnosis - Please see manual for a description.

To transfer the load to another AC source: the automatic transfer switch - For our low power inverters we recommend our Filax Automatic Transfer Switch . The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch.

VictronConnect Compatible: VictronConnect lets you get live status information and configure any Victron products which either have Bluetooth built in, or are connected to a VE.Direct Bluetooth Smart Dongle , or a VE.Direct to USB Interface

Find out more about VictronConnect here , or download the App via these links

Phoenix Smart Inverter 18.6-34VDC input 24V VPSINV-24/3000

Related Products:

  • VE.Direct to USB Interface
  • Phoenix Inverter Control VE.Direct
  • Colour Control GX
  • BMV-712 Smart

24V 3000VA

Bluetooth built-in: fully configurable with a tablet or smartphone

  • Low battery voltage alarm
  • Low battery voltage cut-off and restart levels
  • Dynamic cut-off: load dependent cut-off level
  • Output voltage: 210 - 245V
  • Frequency: 50 Hz or 60 Hz
  • ECO mode on/off and ECO mode sense level
  • Alarm relay

Monitoring:

  • In- and output voltage, load and alarms

VE.Direct communication port - The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters.

Proven reliability - The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

High start-up power - Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

ECO mode - When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.

Remote on/off - A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).

LED diagnosis - Please see manual for a description.

To transfer the load to another AC source: the automatic transfer switch - For our low power inverters we recommend our Filax Automatic Transfer Switch . The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch.

VictronConnect Compatible: VictronConnect lets you get live status information and configure any Victron products which either have Bluetooth built in, or are connected to a VE.Direct Bluetooth Smart Dongle , or a VE.Direct to USB Interface

Find out more about VictronConnect here , or download the App via these links

So you’ve done your shopping; just how long will it be till you can rock that new bit of tech?

Here are a few things to consider while you wait for your order:

  • We ship in business days. Monday - Friday, excluding national holidays.
  • Shipping starts from the date you received the “Your Order Has Shipped!” email.
  • The estimate above does not include processing time - we need 1-3 business days to process your order. This can vary depending on the time of the month and the warehouse's workload - If you need something processed faster than this please CALL US before placing your order!

HBPlus is an Australian company - we work with production and shipping partners all over the world to get your things to your doorstep, wherever that may be. Although the vast majority of our customers will get their orders by the day listed above, actual timeframes may vary from region to region.

So when do you contact HBPlus?

Take your date of order placement, add 2 business days plus the estimated shipping days and when that day rolls around and you still don't have it please get in contact with us. Even if your order hasn’t arrived by the listed date, it’s probably still on its way (and worth the wait).

How much is shipping?

You can view an estimate on the product page for how much an individual item costs to ship to your postcode. Once you’ve clicked through to Secure Checkout, you can enter your delivery address and choose a shipping method. Shipping costs are then calculated and you can select your preferred method. Shipping is then tacked on to your subtotal at the bottom of the page.

Can I track my order? 

We rely on a network of shipping partners and couriers as well as local postal services to get your order to your doorstep as soon as possible. Tracking is available once the order ships and the carrier collects the order. These details will be included on your orders page as well as on the shipping email we send you.

Where does my order ship from?

As one of Australias largest wholesalers, we have an Australian network of Warehouse's, 3PL DC's. In most cases your order will ship from our Main Victorian warehouse however depending on stock availability and/or location we may ship from a different location. At all times this will be to improve our service and delivery time frame to you.