24V 30A Skylla IP44 SLA/ LiFePO4 Triple Output Charger with M6 Connection SKY024030100
The Skylla-IP44 (3) features 3 isolated outputs. All outputs can supply the full rated output current. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions. For status monitoring and to easily adapt the charge algorithm to a particular battery and its conditions of use. To connect to a CAN bus network, to a Skylla-i Control panel or to the Color Control digital display. Several chargers can be connected in parallel and synchronised with help of the CAN bus interface. in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the Skylla-IP44 will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached. Every Skylla-IP44 comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. In order to compensate for voltage loss due to cable resistance, the Skylla-IP44 is provided with a voltage sense facility so that the battery always receives the correct charge voltage. As a result of the excellent control circuit, the Skylla-IP44 can be used as a power supply with perfectly stabilized output voltage if batteries or large buffer capacitors are not available.
Features:
- 3 isolated outputs
- full rated output
- Power components will always operate within specified limits
- A CAN bus network
- A high absorption voltage
-
Skylla -IP44 comes with a battery temperature sensor
- Voltage sense facilities
- Excellent control circuit
Simple charger on-off control can be implemented by connecting a relay or open collector opto coupler output from a Li-Ion BMS to the remote control port of the charger. Alternatively complete control of voltage and current can be achieved by connecting to the CAN bus port.
